Skip to content
POLA Electrostatic Universal In-Ear Monitor
POLA Electrostatic Universal In-Ear Monitor
POLA Electrostatic Universal In-Ear Monitor
POLA Electrostatic Universal In-Ear Monitor

POLA Electrostatic Universal In-Ear Monitor

$1,099.00 SGD

Shipping calculated at checkout.

Pickup available at 76 Playfair Road

Usually ready in 5+ days

View store information

POLA Electrostatic Universal In-Ear Monitor

76 Playfair Road

Pickup available,usually ready in 5+ days

76 Playfair Road
01-03, LHK2 Building
Singapore 367996
Singapore

+6587315476

Tech Overview

Specifications

  • Driver Count: 2

  • Crossover: 2 Way

  • Sensitivity: 108dB

  • Impedance: 12Ohm

  • Frequency: 10Hz - 40kHz

  • Distortion<=0.5%

Introduction

Key Features

  • Speical AAW x Shozy Collaboration Project
  • 13mm Graphene Diaphragm Dynamic Driver
  • Dual  Electrostatic Super Tweeter
  • TrueXross 2 Way Crossover
  • Symphonym Tiburon UPOCC Copper Cable

Dual Electrostatic Super Tweeter

Powered by the cutting-edging miniature electrostatic tweeter technology, It employs a six micro gram, gold plated membrane held against a plate charged up to 400 volts. The electrical signal voltage is amplified up to 100 times via a built-in miniature transformer. The electrostatic attraction and repulsion effects induced by music signal triggers the membrane to produce acoustic pressure. Simply plug into your player and high fidelity music is ready to go.

What is POLA

‘‘A design that truly brings out the ES driver’s qualities’’

The first thing that comes to our mind when the latest Sonion ES-driver consisting of fancy micro step-up transformers are sent to us in early 2018?

It is not about achieving higher specs, but rather what we can do to utilize the design for a higher level of perceived enjoyment and a more immersive experience in listening!

POLA - the end result after a year worth of product research, houses a large and fast 13MM Graphene (carbon allotrope)  dynamic driver driving a lot of air, implemented to pair with the latest ES driver quite alike traditional speakers with a super tweeter.

Now you can hear very deep and layered bass, charming and full-bodied vocal and even fine details in the ambiance thanks to the new tweeter innovation and synergy of the design.

Design Story

The original POLA is displayed at Canjams in Early 2018, earliest prototype is a 3D metal printed universal housing featuring a smaller diameter dynamic driver with the electrostatic drivers. The sound is very well received however together with AAW we hope to push the design to its limits. During 2018 we have tried to put prototypes with BA, multi hybrid designs at show and private gatherings for feedbacks, and in the end we are answering with the current design that houses not only specifications that goes up the roof, but concrete driver implementations allowing the design to scale up with sources and reflects the mastering’s quality. At just 16ohms POLA will work with most phones and laptops, and quality DAPs or Amplifiers supplying better power, also well mastered tracks will definitely boost performance to a more enjoyable tier!

Specification

  • DUAL crossover, vented design for optimized dynamic driver performance
  • 10Hz-100000Hz mega wide band performance
  • <0.5% Total Harmonic Distortion
  • 12 Ohm low impedance
  • Dual bore design

*Specification and internal parts for Custom Version is slightly different to accommodate changes when switching from universal to custom housings

Accessories and Warranty

48" Null Audio Tiburon UPOCC Copper Detachable Cable
AAW Carrying Case
3 Pairs SpinFit Silicone Tip(S/M/L)*
3 Pairs AAW Short Stem Foam Tips(S/M/L)*
6 Pairs AAW Assorted Silicone Tips (S/M/LX2)*
1 Year Limited Warranty


* For Universal Fit Only

The AAW Vantage

Advanced AcousticWerkes
CUSTOM FITMENT
AAW custom monitors start from a 3D scan of your physical ear impressions. The shell is modeled around your canal and concha geometry — a fit only you can wear, with a seal that holds through long sessions and isolation that doesn't depend on tip choice.
Advanced AcousticWerkes
UNIVERSAL FITMENT
AAW universal shells are shaped from years of real ear-impression data — anatomy patterns drawn from thousands of custom builds. The result is a universal shell that sits closer to a custom fit than most one-size designs manage, especially over long listening.
Advanced AcousticWerkes
SKIN SAFE MATERIAL
AAW shells are built in medical-grade acrylic resin or PVD-coated aluminum — dense, hard-wearing, and hypoallergenic. The resin shells are sealed with an anti-bacterial top-coat for daily contact with skin.
Advanced AcousticWerkes
Precision Audio Design
Hybrid driver work is the center of what AAW does. CAD modeling and acoustic simulation handle placement and chambering; the final voicing is done by ear, then validated on the measurement bench. The aim is one coherent sound — not a stack of drivers each fighting for attention.
Advanced AcousticWerkes
Faceplate Options
Custom faceplate work is what makes each CIEM look like one person's monitor. Choose resin colors, abalone or carbon inlays, hand-painted artwork, engraving, or stone insets. The shell is built once; the face is yours to design.

Owner Reviews

POLA Electrostatic Universal In-Ear Monitor listening impressions

Customer review archiveRead owner impressions as the Judge.me review archive becomes available.

Search

Cart

Your cart is empty.

Your cart is empty. Start with the Z Series or explore custom IEMs.

Continue shopping
POLA Electrostatic Universal In-Ear Monitor
POLA Electrostatic Universal In-Ear Monitor